English
ZJL series is a single-stage, vertical centrifugal slurry pump. ZJL Heavy Duty Sump Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres.
Material | Cr27/Cr30/Sic/Rubber |
Casing | Double Casing |
Stage | Single |
Capacity | Up to12 00 m³/h / 5280 US gpm |
Head | Up to 42m / 138ft |
Frequency | 50/60Hz |
Temperature | Up to 90℃/180℉ |
Discharge size | 40 to 250 mm / 2 to 10 inches |
Pressure | Up to 25 bar / 362 psi |
Drive | Motor |
Accessories support
Motor | ABB/Siemens/WEG |
Coupling | TRUMY |
Mechanical seal | John Crane |
Flushing system | Colossus |
Bearing | SKF/FAG |
Electric | ABB/Siemens/DELIXI |
Material
No | Name | Material | No | Name | Material |
1 | Impeller | Cr27/Cr30/Rubber | 8 | FPL insert | Cr27/Cr30 |
2 | Volute casing | Cr27/Cr30/Rubber | 9 | Expeller | Cast iron |
3 | Front housing | Cast iron | 10 | stuffing box | Cast iron |
4 | Throughbush | Cr27/Cr30/Rubber | 11 | shaft sleeve | 4Cr13 |
5 | Inlet short pipe | Cast iron | 12 | Bracket cover | Cast iron |
6 | Outlet short pipe | Cast iron | 13 | coupling | Cast iron |
7 | Rear housing | Cast iron | 14 | bracket | Cast iron |
The rugged ZJL Heavy Duty Sump Pumps are available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in:
Minerals processing
Coal preparation
Chemical processing
Effluent handling
Sand and gravel
And tank, pit or hole-in-the- ground slurry handling situation.
Abrasive and/or corrosive slurries
Large particle sizes
High density slurries
Continuous or "snore" operation
Contact With Us:
E-mail: bo@lubor-pump.com
Have a Questions? Call Us:
Add:
No.901 Shuangsheng Road,Lvshunkou District,Dalian
Please contact Hengchuang for your waste management solutions!
